CNC masina, projekat.

Završeni projekti naših članova foruma sa pratećom dokumentacijom za ponovnu izradu istog.

Moderators: stojke369, pedja089, [eDo], trax

Re: CNC masina, projekat.

Postby TomicIgor » 21-06-2011, 22:38

Hvala vam na odgovorima, probacu taj kod sutra-prekosutra... a mjerna jedinica je podesena na mm... jedino znaci ostaje podesavanje broj koraka po mm? i gdje se to podesava?

Pozdrav
User avatar
TomicIgor
 
Posts: 46
Joined: 25-06-2009, 23:34

Re: Re: CNC masina, projekat.


Re: CNC masina, projekat.

Postby electron » 03-07-2011, 21:25

Kakva napajanja koristite za CNC kontrolere? Neka shema?
User avatar
electron
 
Posts: 221
Joined: 28-02-2009, 19:20
Location: Serbia

Re: CNC masina, projekat.

Postby Asmir_Hadzic » 04-07-2011, 00:22

Onakva kakva kontrolor trazi :)
Asmir_Hadzic
 
Posts: 125
Joined: 05-11-2008, 23:39
Location: preko bare :)

Re: CNC masina, projekat.

Postby electron » 04-07-2011, 11:35

Evo za ovaj? nema nista od dokumentacije?

http://img268.imageshack.us/img268/8596 ... emicro.jpg




http://img96.imageshack.us/img96/7403/kontrolerj.jpg

Vidi se da je 36V DC max i 0,6-3A po namotaju, sto bi bilo oko 9A ukupno.
User avatar
electron
 
Posts: 221
Joined: 28-02-2009, 19:20
Location: Serbia

Re: CNC masina, projekat.

Postby electron » 04-07-2011, 12:10

User avatar
electron
 
Posts: 221
Joined: 28-02-2009, 19:20
Location: Serbia

Re: CNC masina, projekat.

Postby sedin » 06-07-2011, 15:56

pozdrav

>electron< jeli moze post seme ovog interfacea ?

http://img268.imageshack.us/img268/8596 ... emicro.jpg
sedin
 
Posts: 87
Joined: 28-07-2010, 17:01

Re: CNC masina, projekat.

Postby electron » 17-07-2011, 20:31

User avatar
electron
 
Posts: 221
Joined: 28-02-2009, 19:20
Location: Serbia

Re: CNC masina, projekat.

Postby electron » 17-07-2011, 20:43

Jos jedna fotka prilikom opterecivanja i merenja napona, struje temperature tj. zagrevanja
http://img13.imageshack.us/img13/2189/sdc11105o.jpg
User avatar
electron
 
Posts: 221
Joined: 28-02-2009, 19:20
Location: Serbia

Re: CNC masina, projekat.

Postby electron » 05-12-2014, 17:35

Napravio sam CNC masinu, u ArtCamu sam uradio jednostavan G-code, medjutim radi mi naopako u "ogledalu" . ako neko ima iskustva, kako da podesim Mach3 da radi kako treba? http://youtu.be/phwg5E0D1js
User avatar
electron
 
Posts: 221
Joined: 28-02-2009, 19:20
Location: Serbia

Re: CNC masina, projekat.

Postby pedja089 » 05-12-2014, 19:36

Ono sta meni prvo pada na pamet, da zamenis 2 faze na motorima. I to je to...
EDIT:
Sa snimka mi se cini da treba samo na jednom motoru.
User avatar
pedja089
 
Posts: 7812
Joined: 20-02-2007, 14:50
Location: Beočin -Srbija

Re: Re: CNC masina, projekat.


Re: CNC masina, projekat.

Postby grunf » 05-12-2014, 20:36

Mislim da to nije rjesenje, imas u postavkama za port "direction" bit, koliko se mogu sjetiti.
User avatar
grunf
 
Posts: 286
Joined: 19-04-2008, 14:22
Location: Cvjećara

Re: CNC masina, projekat.

Postby electron » 05-12-2014, 21:37

Sada mi je vec kasno, ali cu probati odmah ujutro, pa javljam rezultate
User avatar
electron
 
Posts: 221
Joined: 28-02-2009, 19:20
Location: Serbia

Re: CNC masina, projekat.

Postby electron » 05-12-2014, 22:12

Slucajno sam pobrisao video na youtube :( , evo novi http://youtu.be/A0ppfzzNF54
User avatar
electron
 
Posts: 221
Joined: 28-02-2009, 19:20
Location: Serbia

Re: CNC masina, projekat.

Postby electron » 06-12-2014, 19:02

E ovako problem resen, bio je problem u podesavanju samog mach3, kao i u tome da su zamenjene ose x i y u podesavanjima od step motora
User avatar
electron
 
Posts: 221
Joined: 28-02-2009, 19:20
Location: Serbia

Re: CNC masina, projekat.

Postby grunf » 06-12-2014, 21:10

Rekao sam ja da je u port setttings :-)
User avatar
grunf
 
Posts: 286
Joined: 19-04-2008, 14:22
Location: Cvjećara

Re: CNC masina, projekat.

Postby crash override » 08-12-2014, 23:07

Pozdrav electron,mozes li postaviti vise informacija za ovaj cnc sto si napravio? Da li su motori sa 5 zica, 1,8deg ,1A? Kakvo je iskustvo,mozes li pcb plocice raditi,imaju li snage motori i jesi pravio kontroler po nekoj semi ili si kupio gotov? Hvala
User avatar
crash override
 
Posts: 62
Joined: 16-10-2009, 19:33
Location: Republika Srpska

Re: CNC masina, projekat.

Postby electron » 29-03-2015, 10:22

Izgled upravljackog ormara CNC
Attachments
SDC14960.JPG
SDC14960.JPG (107.64 KiB) Viewed 13231 times
SDC14957.JPG
SDC14957.JPG (117.65 KiB) Viewed 13231 times
SDC14955.JPG
SDC14955.JPG (47.56 KiB) Viewed 13231 times
User avatar
electron
 
Posts: 221
Joined: 28-02-2009, 19:20
Location: Serbia

Re: CNC masina, projekat.

Postby Amir_B » 20-06-2016, 10:48

.. poslao sam pp ..
Nije meni što sanjam na Njemačkom nego me brine što ima titl na Kineskom !
User avatar
Amir_B
 
Posts: 37
Joined: 03-05-2016, 13:48
Location: Sarajevo, BiH

Previous

Return to Gotovi projekti - sa dokumentacijom

Who is online

Users browsing this forum: No registered users and 2 guests

GOOGLE