Car Radio Decoding and Programming

Programi za crtanje shema i pločica, simuliranje el. sklopova, savjeti. Diskusija o ostalim programima vezanim za elektroniku.

Moderators: stojke369, pedja089, [eDo], trax

Car Radio Decoding and Programming

Postby sellyfast » 24-04-2005, 09:33

Sorry if this is wrong section , I am looking for advice on reading eeproms and MCUs via a dongle or handheld programmer.Currently we are physically taking apart some of the radios to read eeproms but this means using a clip to read the eeprom and I am sure that there must be a better way. Any advice would be gratefully received

We have recently had an experience with a Citreon (Philips)Radio where we sought to read the eeprom and on reinstalling the radio a fault occured and it will not power up
sellyfast
 

Postby trax » 24-04-2005, 09:40

Hello,

You could try posting the problem here: http://www.edaboard.com/

Trax
User avatar
trax
 
Posts: 3487
Joined: 08-01-2005, 18:04
Location: 75k, BA

Postby vg_mac » 25-10-2005, 23:21

Molim za pomoc
Imam isprogramirani PIC 12F629, imam AllPic programmer....
Moze li mi neko reci kako da iskopiram pic-a 12F629
Hvala
vg_mac
 
Posts: 1
Joined: 25-10-2005, 23:15
Location: Skopje, Macedonia

Postby buco » 25-10-2005, 23:32

jel to neka sala ?? Ako imas programator za koji radi s tim MCUom i nije orginal zakljucan mislim da sve ostalo znas procitaj / upisi u i evo ti klon.
Pozdrav
buco
 


Return to Programi

Who is online

Users browsing this forum: No registered users and 1 guest

BLOG RAZMJENA